dmesg - Intel Xeon X5650

Return To Intel Xeon X5650 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.12-37.4.1.el6uek.x86_64 (mockbuild@x86-ol6-builder-05) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #2 SMP Tue May 17 07:23:38 PDT 2016
Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=VolGroup/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.3.1OVM 12/25/2016
Hypervisor detected: Xen
Xen version 4.3.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-combining
  C0000-FFFFF write-back
MTRR variable ranges enabled:
  0 base 00F0000000 mask FFF8000000 uncachable
  1 base 00F8000000 mask FFFC000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at [ffff8800000fbba0]
Base memory trampoline at [ffff880000097000] 97000 size 28672
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x0207f000, 0x0207ffff] PGTABLE
BRK [0x02080000, 0x02080fff] PGTABLE
BRK [0x02081000, 0x02081fff] PGTABLE
init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
 [mem 0x7fe00000-0x7fffffff] page 2M
BRK [0x02082000, 0x02082fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7fdfffff]
 [mem 0x60000000-0x7fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x5fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x5fffffff] page 2M
RAMDISK: [mem 0x36134000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen   )
ACPI: XSDT 0x00000000FC00F700 00004C (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00F400 0000F4 (v04 Xen    HVM      00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0035E0 00BD91 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: APIC 0x00000000FC00F500 0000D8 (v02 Xen    HVM      00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00F650 000028 (v01 Xen    HVM      00000000 HVML 00000000)
ACPI: SSDT 0x00000000FC00F680 000031 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: SSDT 0x00000000FC00F6C0 000031 (v02 Xen    HVM      00000000 INTL 20090123)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
NODE_DATA(0) allocated [mem 0x7ffd9000-0x7fffffff]
cma: Reserved 16 MiB at 0x000000007ec00000
 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c400000-ffff88007e3fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000007fffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000007fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff]
On node 0 totalpages: 524189
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 8128 pages used for memmap
  DMA32 zone: 520192 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 15 CPUs, 13 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x80000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88007e800000 s101016 r8192 d30056 u262144
pcpu-alloc: s101016 r8192 d30056 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 -- 
xen: PV spinlocks enabled
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515975
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=VolGroup/lv_root  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 1996688K/2096756K available (6937K kernel code, 1550K rwdata, 3680K rodata, 1796K init, 2872K bss, 83684K reserved, 16384K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=15
NR_IRQS:524544 nr_irqs:952 16
xen:events: Using 2-level ABI
xen:events: Xen HVM callback vector for event delivery is enabled
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-14.
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Detected 2666.830 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.66 BogoMIPS (lpj=2666830)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81da7000 - ffffffff81dae000)
ftrace: allocating 27831 entries in 109 pages
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz (fam: 06, model: 2c, stepping: 02)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1cpu 1 spinlock event irq 59
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10667.32 BogoMIPS)
devtmpfs: initialized
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io  0xc320-0xc32f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io  0xc300-0xc31f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: [5853:0001] type 00 class 0xff8000
pci 0000:00:03.0: reg 0x10: [io  0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to clocksource xen
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x08a0-0x08a3] has been reserved
system 00:01: [io  0x0cc0-0x0ccf] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io  0x10c0-0x1141] has been reserved
system 00:08: [io  0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31472K (ffff880036134000 - ffff880037ff0000)
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x1d
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x1d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1489059581.928:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
page_owner is disabled
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 44
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
xen: --> pirq=24 -> irq=28 (gsi=28)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c300
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.12-37.4.1.el6uek.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
gre: GRE over IPv4 demultiplexor driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c'
Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab'
Loaded X.509 cert 'Oracle CA Server: 0cf9b0deb17dfe8d0657cdfc8af8f92415fd9d18'
registered taskstats version 1
ima: No TPM chip found, activating TPM-bypass!
xenbus_probe_frontend: Device with no driver: device/vfb/0
xenbus_probe_frontend: Device with no driver: device/vbd/51712
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
rtc_cmos 00:02: setting system clock to 2017-03-09 11:39:41 UTC (1489059581)
Freeing unused kernel memory: 1796K (ffffffff81be6000 - ffffffff81da7000)
dracut: dracut-004-409.0.1.el6_8.2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
udev: starting version 147
FDC 0 is a S82078B
dracut: Starting plymouth daemon
usb 1-2: new full-speed USB device number 2 using uhci_hcd
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc320 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc328 irq 15
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input5
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
blkfront: xvda: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled;
 xvda: xvda1 xvda2
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
tsc: Refined TSC clocksource calibration: 2666.764 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x267099e83e7, max_idle_ns: 440795324114 ns
dracut: Scanning devices xvda2  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root 
random: lvm urandom read with 69 bits of entropy available
dracut: inactive '/dev/VolGroup/lv_root' [2.21 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [304.00 MiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit: type=1404 audit(1489059582.766:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: PC Speaker as /devices/platform/pcspkr/input/input6
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
random: nonblocking pool is initialized
xen_netfront: Initialising Xen virtual ethernet driver
ppdev: user-space parallel port driver
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 311292k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:311292k SSFS
NET: Registered protocol family 10
audit: type=1305 audit(1489059611.264:3): audit_pid=1620 old=0 auid=4294967295 ses=4294967295 res=1
blkfront: xvdb: flush diskcache: enabled; persistent grants: enabled; indirect descriptors: enabled;
EXT4-fs (xvdb): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
net_ratelimit: 10 callbacks suppressed
net_ratelimit: 34 callbacks suppressed
net_ratelimit: 3 callbacks suppressed
net_ratelimit: 5 callbacks suppressed
net_ratelimit: 10 callbacks suppressed
net_ratelimit: 11 callbacks suppressed
net_ratelimit: 19 callbacks suppressed
net_ratelimit: 12 callbacks suppressed
net_ratelimit: 1 callbacks suppressed
net_ratelimit: 13 callbacks suppressed
net_ratelimit: 5 callbacks suppressed
net_ratelimit: 8 callbacks suppressed
net_ratelimit: 2 callbacks suppressed
net_ratelimit: 11 callbacks suppressed
net_ratelimit: 10 callbacks suppressed
net_ratelimit: 12 callbacks suppressed

Return To Intel Xeon X5650 System Information